86-025-5119 7362
English
日本語
한국어
français
Deutsch
Español
italiano
русский
português
Türkçe
Nederland
The sample injector is a fast switching solenoid valve that worked by switching two positions back and forth and was configured with sample loops between two of the ports to create a specific volume column to meet final dispensing requirements, so the accuracy of tubing inner diameter is very important to ensure the accurate sample dispensing volume. Runze is a professional switching valve manufacturer and supplier, we are able to offer various fluid control equipment. If you want to know more, please contact us now!
Orifice | 1.2mm |
Wetted material | PCTFE, Sapphire |
Port configuration | 6/8/10 port |
Port-to-Port volume | 27.5μL |
Dead volume | 5.4μL |
Air pressure | 0-1.0Mpa |
Water pressure | 0-1.6Mpa |
Origin detection | Auto reset to initial position when powered on (optional and settable) |
Liquid temperature | 0-150℃ |
Connection | 1/4-28UNF |
Replaceable parts | Stator replaceable, sealed rotor irreplaceable |
Transposition | Random start to any specific port |
Driver | Non-optional |
Valve drive | ≤500ms |
Max. torque | 3N/m |
Communication | RS232, RS485, CAN |
Baud rate | RS232/RS485: 9600bps, 9200dps, 38400dps, 57600dps, 115200dps CAN: 100Kbps, 200Kbps, 500Kbps, 1Mbps |
Address & Parameter setup | Communication interface |
Power supply | DC24V/2.0A |
Max power | 36W |
Operating temperature | -10℃ to +50℃ |
Operating humidity | <80% relative humidity, non-condensing |
Dimension (L*W*H) | 60*51*145.8mm |
Net weight | 0.73KG |
Port | Description |
+ | DC24V positive |
- | DC24V negative |
TX | RS232 data input |
RX | RS232 data output |
GND | GND |
H | CANH |
L | CANL |
A | RS485 A |
B | RS485 B |
Dimension (unit: mm)
