Peristaltic pump SR400 it is available with SN series and YZ series pump heads in high flow rate, LCD screen shows the current pumping speed to help users control speed flexibly, foot pedal is optional when used the pump as infiltration liposuction pump, it is a high cost performance pump for liquid transfer in many fields.
SST 3/6 rollers
ABS engineering plastic (YZ)
PC engineering plastic (SN)
ID1.6-8.0mm WT1.6-2.5mm OD≤11.4mm
Silicone≥200H BPT Rubber≥1000H
Up to 2 bar（30psi）
5508g(3 roller)/5608g(6 roller)
Food grade, High flexibility Temp. range -4℃ - +180℃ For non-corrosive liquid
Saint-Gobain, FDA standard Temp. range -51℃- +132℃ Anti weak acid and alkali
MasterFlex, FDA Standard Temp. range -20℃- +260℃ Anti strong acid and alkali
1. Tubing life measured by pumping pure water under continuous working at the room temperature 20℃ and no extra pressure until it cracks.
2. Tubing life vary from different medium, motor speed, working environment, the lower motor speed helps to extend the service life of tubing.
3. Please replace new pump tube regularly to achieve higher precision liquid transfer.
Flow Rate Instruction (YZ1515X)
3 Roller Flow rate (ml/min)
6 Roller Flow rate (ml/min)
Function of Foot Pedal
Step 1 Connect the plug into power supply AC110-240V
Step 2. Connect the foot pedal into the interface at back of the pump
Step 3. Press the power (main) switch at back of the pump
Step 4. Press the red ON/OFF button at front of the pump to start the pump, at this time you can see shaft of pump is turning
Step 5. You can gently turn the SPEED button at front of the pump to adjust the speed
Remark 1: The pump must be started working under lower speed,so SPEED button must stay at nearly middle (or less at CCW direction) position before start working
Remark 2: Foot pedal only works when the red button at front of the pump staying ON (Foot pedal will NOT works when the red button at front of the pump staying OFF)
Remark 3: Foot pedal must be connected with the pump, or the buttons on the pump will lose its functions
Remark 4: SPEED adjustment only works when pump is working (shaft of pump is turning)(SPEED will not be adjustable when pump is stopping)
Dimension (unit: mm)