Invitation Letter --- Runze Fluid 2020 CMEF Exhibition Guide, Looking Forward to Your Review!

Runze Fluid

Runze is waiting for you

The 83rd China International Medical Equipment Fair

The 30th China International Medical Device Design and Manufacturing Technology Exhibition

2020 International Smart Health Exhibition

Booth 1.1K42 in Hall 1

National Exhibition and Convention Center (Shanghai) Address: No. 333 Songze Avenue, Shanghai

The 83rd China International Medical Equipment Expo, the 30th China International Medical Equipment Design and Manufacturing Technology Exhibition, and the 2020 International Smart Health Exhibition will grandly open in Shanghai on October 19, 2020.

At that time, Nanjing Runze Fluid Control Equipment Co., Ltd. will bring new products to the exhibition, and sincerely invite you to visit the booth to participate in the industry festival!

October 19-22, 2020, National Exhibition and Convention Center (Shanghai)

Pavilion: National Exhibition and Convention Center (Shanghai)

Exhibition time: 2020.10.19—2020.10.22

Booth location: 1.1K42 in Hall 1

Exhibition hall address: Shanghai-Songze Avenue-No. 333

On-site contact: 138-5195-4068

RUNZE

Runze Fluid

Runze is waiting for you

October 19-22, 2020, National Exhibition and Convention Center (Shanghai)

Nanjing Runze Fluid Control Equipment Co., Ltd. is a high-tech company integrating fluid components and system, R&D, production and sales. It has been focusing on the development, production and sales of standard products such as syringe pumps, high-pressure valves, switching valves, peristaltic pumps, gas-tight sample injectors, and pipe joints. It is a leading supplier of fluid components and system solutions in China.

While paying great attention to the quality, delivery, value and technology of products and services, we also continue to provide high-quality products and services for the fields of biopharmaceuticals, medical equipment, industrial automation, environmental monitoring and laboratory instruments. As a leading domestic fluid component and System solution provider, Runze Fluid has obtained 38 patents.

(Effect picture of Runze Fluid booth)

At this CMEF exhibition, Runze Fluid will share new fluid control equipment and look forward to working with you.

[Part 1]

New product representative 1:

PEEK inverted cone connector

The connector is made of PEEK, which is insoluble in almost all solvents except concentrated sulfuric acid.

High temperature resistance, wear resistance, large friction coefficient and large mechanical coefficient. The joint is not easy to loosen after tightening. It is superior to PTFE in terms of impact resistance.

Five hard pipes with outer diameter of 1.6/2.0/2.5/3.0/3.2mm can be used. It can be disassembled repeatedly without affecting its airtightness.

The long-term working temperature range is -100~+250 degrees Celsius.

With complete specifications and wide applications, it can meet the needs of laboratories, medical analysis, environmental testing, food testing, biochemical analysis and petroleum industry.

New product representative 2:

LM60 series intelligent filling peristaltic pump

The flow rate, speed, and liquid volume can be controlled separately through the button panel. It also has 4 common control modes, calibration, continuous, quantitative, and appointment.

It has high-performance processor and motor drive, control stepper motor and motor subdivision adaptive with the lowest speed of 0.1rpm.

With back suction angle setting, it has rich application scenarios. It can support keyboard control mode, communication control mode (RS232, RS485 bus), external control mode (optional multiple signal conversion modules), and passive contact state output.

"Runze" Exhibitor Selection

[Part 2]

01

SV-06 multi-channel switching valve

The valve core is made of sapphire, which is corrosion resistant, high temperature resistant, high pressure resistant, ultra-high wear resistance, and is suitable for a variety of special media.

The standard RS232/RS485/CAN communication interface meets a variety of design requirements.

The of the flow newly developed large diameter of 3.0mm, under the pressure of 0.45Mpa, can reach 3000ml/min, especially suitable for the flow path with impurities, particles, being prone to crystallize, and high viscosity.

02

Smart SV-04 multi-channel switching valve

A new generation of switching valve, with small size and exquisite appearance, is suitable for a variety of flow path matching schemes, which is conducive to the miniaturization of equipment and meets the different needs of customers.

The valve core is made of sapphire, which is corrosion resistant, high temperature resistant, high pressure resistant and ultra-high wear resistance, and is suitable for a variety of special media.

Standard RS232/RS485/CAN communication interface to meet a variety of design requirements.

It uses a new optical encoder, increase safety capacitor/communication port protection, anti-surge protection, and reduce power drop/ESD interference, which can adapt to the harsher working environment and help form a protective barrier against interference.

03

Mrv-01B high pressure valve

State feedback, stable liquid output and long-term operation

High pressure resistance, positive pressure to 1.2Mpa and negative pressure to 0.06Mpa with status feedback. The valve body can be heated to 80°C.

When the valve is switched, no liquid fluctuation or pulsation will be generated, ensuring the stability of the liquid outlet.

Because of being driven by a stepping motor, it can be opened or closed for a long time compared to solenoid valves.

04

Runze Syringe Pump Series

(MiNi SY-04 display picture)

Runze patented product of small size to save installation space.

It has texted over 3 million times without leakage (medium pure water). The wetted material is made of imported special fluoroplastics, which is resistant to corrosion and high temperature, and is suitable for a variety of special media.

Standard Japanese NMB stepper motor, KSS ball screw, high stability and maintenance-free. It can be equipped with a dedicated drive control, or it can be controlled by the user.

(Smart SY-01 product display diagram: rated stroke 30mm)

(SY-03 product display diagram: rated stroke 60mm)

Smart SY-01 and SY-03 are high-end products in the high-precision micro syringe pump independently developed by Runze Fluid. It can be flexibly equipped with a variety of valve heads and samplers while multiple pumps can also be controlled via a bus. It can meet the user's design requirements for high integration, high flexibility, high precision, and high reliability of the hydraulic system.

The excellent performance and flexible application methods of the syringe pump allow users to quickly complete the verification of the system and accelerate the design, development and market application of instruments and equipment.

Do you think this is over?

No

TOP1: Runze plastic joints

Luer joints:

It is a standardized micro non-permeation joint which can simplify the management of liquid and gaseous medical fluids, and allow multiple compatible fluids to be managed using a unified pipeline, which is simple to operate and convenient to use.

Hose joints:

Equal diameter/variable diameter straight-through joints as well as L-type right-angle joints, T-type/Y-type three-way joints, and hose through plate joints are also available.

Hard pipe joints:

There are many different materials such as PP, PTFE, PPS, POM, including pre-tightening force inverted taper, inverted taper joint, flanged joint, inverted taper plug and internal threaded joint with various styles and rich choices. Recently, a PEEK inverted cone joint was newly introduced, which can be used for higher standards.

Hybrid joints:

It includes all kinds of soft and hard butt joints and internal threaded joints such as PP, PTFE material, size standard, with non-slip card edge, which is easy to use.

Hose check valve:

Ultrasonic welding, excellent firmness, three-piece design, simple structure and light weight.