SR100-RZ1010-2D (single channel)
SR100-RZ1010-2S (double channel)
Pump head material
42 step motor
0-339ml/min (single channel)
0-120ml/min (double channel, each channel 0-60ml/min)
Tubes and connectors required
US plug, EU plug, CN plug for option
●MINEBEA step motor imported from Japan with high reliability
●Speed and flow rate adjustable
●Flowing direction reversible
●Plug and play
●Single/double channel for option
●Suitable for micro flow dispensing
SR100-RZ1010 Flow Rate Table
1.These data are generated under room temperature without extra pressure, test media is water. Your results may vary depending on variables such as the solvent used, the material of tubing, temperature, pressure, humidity, voltage etc.
2.SR100-RZ1010 peristaltic pump is suitable for liquid viscosity like water or weak viscosity liquid.
3.SR100-RZ1010 peristaltic pump is suitable for corrosive or non-corrosive liquid when equipping different kinds of tubing, liquid only go through tubing, so tubing material is the main factor for corrosion problem.
4.2 pieces straight connectors are necessary for pump tube on SR100-RZ1010, or tubing will get slide when working, we will standard equip 12.5cm rubber tube and 2 pieces straight connectors for each pump for your order, if you need more tubes and connectors for spare use, please order them in our shop.
5.SR100-RZ1010-2D need to install 1 pieces 12.5cm pump tube and 2 pieces straight connectors.
SR100-RZ1010-2S need to install 2 pieces 12.5cm pump tube and 2 pieces duplex fittings.
6.SR100-RZ1010 peristaltic pump was designed with basic functions of ON/OFF SPEED CW/CCW control, but it is not suitable for bottle filling which need to be preset filling volume, filling time and interval time.
7.Dimension is within the 6 main showing pictures, please check it there.
8.Please switch CW and CCW under low motor speed.
9.We have CN, US and EU plug for option, please leave us message if you need US or EU plug, or we will ship CN as normal orders.