Acid Transfer Pump

Acid Transfer Pump

Technical Parameter Product Features ●Exquisite structure, low consumption, 3 roller/6 roller, moderate pulse ●NMB step motor, low noise, high stability, high precision, long service life ●Mainly used for medical device, micro liquid analysis instruments etc. Motor Parameter Motor Wireline...

Product Details

Technical Parameter

Model No.

BJ30-SN15

Roller numbers

3/6 rollers

Roller material

304 SST

Pump head material

PC

Motor type

57 stepper motor

Motor voltage

24V

Rated current

1.5A  (small motor)
2.3A  (big motor)

Rated power

12W (small motor)
18.8W  (big motor)

Speed

0-500rpm

Flow rate

0-1615ml/min

Tubing

Silicon/Rubber/Viton

Working temp.

0-40℃

Working humidity

80%

Max DB

70db

Weight

1768g


Product Features

●Exquisite structure, low consumption, 3 roller/6 roller, moderate pulse

●NMB step motor, low noise, high stability, high precision, long service life

●Mainly used for medical device, micro liquid analysis instruments etc.

 

Motor Parameter

Name

57 big motor

57 small motor

Max    power

18.8W

12W

Step    angle

1.8°

1.8°

Phase

2

2

Phase    voltage

4.0V

2.6V

Phase    current

2.35A

2.3A

Resistance

1.7Ω ±1.7

1.15Ω ±0.17

Inductance

7mH    REF

1.85mH    REF

Insulation

100mΩ MIN

100mΩ MIN

Temp.    upper limit

80℃MAX

80℃MAX

Explosion-proof    level

B

B


Motor Wireline

Definition

57 small motor

57 big motor

A+

Red

Orange

A-

Yellow

Blue

B+

Blue

Red

B-

Orange

Yellow


Tubing Steps


 image002(001).jpg


Model No.

Order Options

Tubing Size (mm)

Remark

BJ30-SN15-3-DX-14#

3 roller Tube #14

ID1.6*OD4.8*WT1.6

1.Exit diameters of SN15 pump head vary when equipping different tubing sizes, so we classify the model numbers by tubing numbers.

2.Each tube size need 1piece pump by its own.

3.DX – small motor

DD – big    motor

4.Small motor is enough to drive #14 and #16 tubing.

BJ30-SN15-3-DX-16#

3 roller Tube #16

ID3.2*OD6.4*WT1.6

BJ30-SN15-3-DD-25#

3 roller Tube #25

ID4.8*OD8.0*WT1.6

BJ30-SN15-3-DD-17#

3 roller Tube #17

ID6.4*OD9.6*WT1.6

BJ30-SN15-3-DD-18#

3 roller Tube #18

ID8.0*OD11.2*WT1.6

BJ30-SN15-6-DX-14#

6 roller Tube #14

ID1.6*OD4.8*WT1.6

BJ30-SN15-6-DX-16#

6 roller Tube #16

ID3.2*OD6.4*WT1.6

BJ30-SN15-6-DD-25#

6 roller Tube #25

ID4.8*OD8.0*WT1.6

BJ30-SN15-6-DD-17#

6 roller Tube #17

ID6.4*OD9.6*WT1.6

BJ30-SN15-6-DD-18#

6 roller Tube #18

ID8.0*OD11.2*WT1.6


image004(001).jpg

 

Tubing Installation Way

1.20cm pump tube+2pcs straight connectors+ external tube (length as your application    needs)

2.1 whole piece pump tube (length as your application needs)

 

BJ30-SN15 Flow Rate Table

Model No.

Tube size (ID*WT: mm)

Speed (rpm)

3 roller flow rate (ml/min)

6 roller flow rate (ml/min)

BJ30-SN15-DX-14#

1.6*1.6

 

0-500rpm adjustable

1.1-87.4

0.8-59.5

BJ30-SN15-DX-16#

3.2*1.6

4.3-358.3

3.2-220.8

BJ30-SN15-DD-25#

4.8*1.6

10.1-735.1

8.6-380.6

BJ30-SN15-DD-17#

6.4*1.6

13.2-1171.3

6.1-522.7

BJ30-SN15-DD-18#

8.0*1.6

19.3-1793.3

5.8-616.7


Application Note:

1.These data are generated under room  temperature without extra pressure, test media is water. Your results may vary  depending on variables such as the solvent used, the material of tubing,  temperature, pressure, humidity, voltage etc.

2.BJ30-SN15 peristaltic pump is suitable for  liquid viscosity like water or weak viscosity liquid.

3.BJ30-SN15 peristaltic pump is suitable for  corrosive or non-corrosive liquid when equipping different kinds of tubing,  liquid only go through tubing, so tubing material is the main factor for  corrosion problem.

4.We will standard equip 20cm rubber tube and 2  pieces straight connectors for each pump for your order, if you need more tubes  and connectors for spare use, please order them in our shop.

5.1 piece stepper motor wireline will be  standard equipped for each pump for your order.

6.BJ30-SN15 peristaltic pump can be controlled  by ON/OFF SPEED CW/CCW control, PWM control, RS232/RS485/CAN communication  control, you can find corresponding driver in our shop.

7.The stepper motor of BJ30-SN15 peristaltic  pump was MINEBEA imported from Japan with high reliability, if you need the  manual of motor, please contact our customer service.

8.Dimension and installation sizes are within  the 6 main showing pictures, please check them there.

 

Hot Tags: acid transfer pump, China, manufacturers, suppliers, factory, wholesale

Related Products

Inquiry